Build your career in aerospace manufacturing.

About the role

This is a hands-on role suited to someone with good practical ability, strong attention to detail and a commitment to high-quality workmanship. You will be responsible for assembling components used in the aerospace industry, working to strict engineering standards and maintaining full compliance with safety and quality procedures.

Key responsibilities

• Assemble aerospace components and sub-assemblies in line with engineering drawings, work instructions and specifications
• Use hand tools, jigs, fixtures and assembly equipment to complete operations accurately and efficiently
• Interpret drawings, route cards and technical instructions to ensure components are assembled correctly
• Carry out basic fitting, drilling, fastening, sealing and finishing tasks as required by the assembly process
• Use measuring equipment and inspection tools to verify dimensions, alignment and conformance to specification
• Ensure all work is completed to required quality standards, with accurate completion of production documentation and traceability records
• Identify and report any non-conformances, defects or issues affecting product quality or production efficiency
• Maintain tools, equipment and work areas in a clean, safe and serviceable condition
• Follow all health and safety, environmental and quality requirements at all times

Skills and experience

• Previous assembly experience within engineering, manufacturing or aerospace is preferred, although this is not essential
• A recognised apprenticeship or qualification in Engineering, Manufacturing or a related discipline would be advantageous
• Ability to read and interpret engineering drawings, specifications and work instructions
• Good practical knowledge of assembly techniques, hand tools and measuring equipment
• Experience working to quality standards within a controlled manufacturing environment
• High attention to detail and a commitment to producing work to exacting standards
• Ability to work effectively both independently and as part of a team
• Willingness to learn, follow procedures and contribute to continuous improvement

About the role

This is a hands-on role suited to someone with strong technical ability, excellent attention to detail and a commitment to high-quality workmanship. You will be responsible for manufacturing sheet metal components used in the aerospace industry, working to strict engineering standards and maintaining full compliance with safety and quality procedures.

Key responsibilities

• Manufacture sheet metal components in line with aerospace drawings, specifications and work instructions
• Carry out forming, bending, stretching, shrinking, drilling, trimming and finishing operations using appropriate tools and machinery
• Adjust and shape components using stretching and shrinking machines and other sheet metal equipment to achieve the required form and tolerance
• Interpret and work from engineering drawings, route cards and technical instructions to ensure components are produced accurately
• Use measuring equipment and inspection tools to verify dimensions, tolerances and conformance to specification
• Ensure all work is completed to required quality standards, with full traceability and accurate completion of production documentation
• Identify and report any non-conformances, defects or issues affecting product quality or production efficiency
• Maintain tools, equipment and work areas in a clean, safe and serviceable condition
• Follow all health and safety, environmental and quality requirements at all times

Skills and experience

• Preferably experienced in aircraft sheet metal work or a related engineering or manufacturing field, although this is not essential
• A recognised time-served apprenticeship within an Engineering discipline at NVQ Level 3, City and Guilds Level 3, BTEC National, or an equivalent qualification
• Strong ability to read and interpret engineering drawings, specifications and work instructions
• Good practical knowledge of sheet metal manufacturing techniques, including forming, stretching and shrinking
• Experience using hand tools, power tools, stretching and shrinking machines, measuring equipment and inspection instruments relevant to sheet metal work
• High attention to detail and a commitment to producing work to exacting quality standards
• Understanding of working within controlled manufacturing environments and following documented processes
• Ability to work effectively both independently and as part of a team

About the role

As a Semi-Skilled Sheet Metal Worker, you will assist in the manufacture and finishing of sheet metal components for aerospace applications. Working alongside skilled operators and fabricators, you will carry out a range of production tasks using approved methods, tools and equipment, while maintaining high standards of safety, accuracy and housekeeping.

Key responsibilities

• Assist in the manufacture of sheet metal components in line with drawings, route cards and work instructions.
• Carry out basic forming, drilling, deburring, trimming and finishing operations using approved tools and equipment.
• Prepare materials and components for production, ensuring correct identification and handling at all stages.
• Use measuring and inspection equipment to check dimensions and confirm conformity to specification.
• Complete production documentation accurately and report any defects, non-conformances or issues promptly.
• Maintain a clean, safe and organised work area, following all health and safety, environmental and quality requirements.

Skills and experience

• Previous experience in sheet metal work, fabrication or a similar manufacturing environment is desirable.
• Ability to read and follow engineering drawings, job cards and work instructions.
• Good practical skills and confidence using hand tools, power tools and basic workshop equipment.
• High attention to detail and a quality-focused approach to work.
• Reliable, safety-conscious and able to work effectively as part of a team.
• Willingness to learn new skills and develop within an aerospace manufacturing environment.

About the role

This is a hands-on role suited to someone with strong attention to detail, a quality-focused mindset and a commitment to maintaining the highest aerospace manufacturing standards. You will be responsible for preparing, jigging and processing aerospace components through approved treatment processes, ensuring all products meet specification and quality requirements.

Key responsibilities

• Carry out Boric Acid Anodising (BAA), Tartaric Sulphuric Acid (TSA) Anodising and Alocroming processes in accordance with approved procedures and specifications.
• Prepare aerospace components for treatment through cleaning, masking, etching and other surface preparation processes.
• Jig and rack components correctly prior to treatment to ensure effective processing and compliance with process requirements.
• Load and unload components safely from treatment tanks and associated equipment.
• Monitor and control treatment process parameters in accordance with process specifications and work instructions.
• Inspect treated components to ensure compliance with customer, engineering and quality requirements.
• Complete production and quality documentation accurately, maintaining full traceability throughout the process.
• Identify, report and segregate non-conforming components in accordance with company quality procedures.
• Ensure compliance with aerospace standards, customer requirements and company quality management systems.
• Maintain treatment equipment, jigs and work areas in a clean, safe and serviceable condition.
• Follow all health and safety, environmental, COSHH and quality requirements at all times when handling chemicals and treatment processes.
• Work closely with Quality, Manufacturing and Engineering departments to support production requirements and resolve process-related issues.

Skills and experience

• Experience in aerospace surface treatments, metal finishing, anodising, plating or a related manufacturing process.
• Knowledge of Boric Acid Anodising (BAA), Tartaric Sulphuric Acid (TSA) Anodising, Alocroming or similar aerospace surface treatment processes would be advantageous.
• Ability to read and interpret engineering drawings, specifications and work instructions
• Experience working with aluminium aerospace components or similar precision-engineered products.
• Experience working to quality standards within a controlled manufacturing environment
• Understanding of jigging, masking and component preparation techniques.
• Strong attention to detail and commitment to maintaining high quality standards.
• Good record-keeping, reporting and documentation skills.
• Understanding of aerospace quality requirements and controlled manufacturing processes.
• Experience working safely with chemicals and following COSHH requirements.
• Ability to work effectively both independently and as part of a team.

About the role

This is a hands-on role suited to someone with strong technical knowledge and a careful approach to quality. You will be responsible for completing controlled heat treatment processes safely and accurately, ensuring every component meets specification, traceability requirements and internal quality standards.

Key responsibilities

• Carry out Solution Treatment, Annealing and Precipitation Hardening processes for aluminium components in line with controlled procedures
• Load and unload furnaces and quenching equipment, ensuring correct temperature cycles and soak times are maintained
• Monitor, record and maintain accurate process data to ensure full traceability of treated components
• Read and interpret technical documents, process specifications and treatment schedules
• Complete hardness checks and visual inspections after treatment to confirm process results
• Work closely with Quality and Production teams to maintain compliance and resolve any process issues
• Maintain a clean, organised and safe working environment
• Complete all production records and supporting paperwork accurately
• Follow all health and safety, environmental and quality standards at all times

Skills and experience

• Previous experience in a heat treatment role within aerospace or precision engineering
• Strong working knowledge of Solution Treatment, Annealing and Precipitation Hardening of aluminium alloys
• A good understanding of metallurgy and the effects of heat treatment on material properties
• Ability to read and follow technical drawings, process specifications and work instructions
• Hands-on experience operating temperature-controlled furnaces and quenching equipment
• Excellent attention to detail and a strong commitment to quality
• Understanding of traceability and record-keeping requirements within aerospace manufacturing
• Ability to work effectively both independently and as part of a team

About the role

This is a hands-on role suited to someone with strong attention to detail, a quality-focused mindset and a commitment to maintaining the highest aerospace testing standards. You will be responsible for preparing, testing and recording the results of material tests to ensure products meet engineering specifications and industry requirements.

Key responsibilities

• Carry out tensile testing of aerospace materials and test specimens in accordance with approved procedures and specifications.
• Perform hardness testing using approved methods and equipment to verify material properties and compliance with customer requirements.
• Prepare test specimens for mechanical testing in accordance with applicable standards and work instructions.
• Operate tensile testing machines, hardness testing equipment and associated measuring devices safely and effectively.
• Record and interpret test results accurately, ensuring compliance with engineering specifications and acceptance criteria.
• Complete testing records, certification documentation and quality reports, maintaining full traceability throughout the process.
• Identify, report and investigate non-conforming results in accordance with company quality procedures.
• Verify that all testing equipment is maintained, calibrated and suitable for use.
• Ensure compliance with aerospace standards, customer requirements and company quality management systems.
• Support the Heat Treatment department by carrying out testing activities required to validate heat treatment processes and product conformity.
• Maintain testing equipment and work areas in a clean, safe and serviceable condition.
• Follow all health and safety, environmental and quality requirements at all times.
• Work closely with Quality, Manufacturing, Engineering and Heat Treatment personnel to support production requirements and resolve testing-related issues

Skills and experience

• Experience in materials testing, laboratory testing, quality inspection or a related engineering or manufacturing environment preferred but not essential
• Knowledge of tensile testing, hardness testing and mechanical testing principles would be advantageous
• Ability to read and interpret engineering drawings, specifications, material standards and work instructions.
• Ability to read and interpret engineering drawings, specifications and work instructions
• Experience working with aluminium alloys and aerospace materials would be advantageous.
• Understanding of heat treatment processes and their effect on material properties would be beneficial.
• Strong attention to detail and commitment to maintaining high quality standards.
• Good record-keeping, reporting and documentation skills.
• Experience using testing equipment, measuring instruments and data recording systems.
• Understanding of aerospace quality requirements and controlled manufacturing processes.
• Ability to work effectively both independently and as part of a team.

About the role

This is a hands-on role suited to someone with strong attention to detail, a quality-focused mindset and a commitment to maintaining the highest aerospace finishing standards. You will be responsible for preparing, masking, priming and painting aerospace components in accordance with approved specifications and procedures, ensuring all products meet the required cosmetic and technical standards.

Key responsibilities

• Prepare aerospace components for painting through cleaning, degreasing, masking and surface preparation processes.
• Apply aerospace primers and top-coats in accordance with approved specifications, technical instructions and customer requirements.
• Mix paints, primers and related materials to the correct ratios and specifications.
• Mask and protect components to ensure coatings are applied only to designated areas and surfaces.
• Operate spray painting equipment and associated tools safely and effectively to achieve the required finish quality.
• Monitor coating application to ensure correct coverage, thickness and finish standards are achieved.
• Inspect painted components for defects, finish quality and compliance with engineering and customer specifications.
• Complete production and quality documentation accurately, maintaining full traceability throughout the process.
• Identify, report and segregate non-conforming components in accordance with company quality procedures.
• Ensure compliance with aerospace standards, customer requirements and company quality management systems.
• Maintain spray booths, paint equipment and work areas in a clean, safe and serviceable condition.
• Follow all health and safety, environmental, COSHH and quality requirements at all times when handling paints, solvents and associated materials.
• Work closely with Quality, Manufacturing and Engineering departments to support production requirements and resolve paint-related issues.

Skills and experience

• Experience in aerospace painting, industrial spraying, surface finishing or a related manufacturing process.
• Knowledge of aerospace primers, top-coats and paint application techniques.
• Ability to read and interpret engineering drawings, specifications and work instructions.
• Experience working with aerospace components or similar precision-engineered products
• Understanding of masking, paint preparation and finishing techniques.
• Experience using spray painting equipment and associated measuring or inspection tools.
• Strong attention to detail and commitment to maintaining high quality standards.
• Good record-keeping, reporting and documentation skills.
• Understanding of aerospace quality requirements and controlled manufacturing processes.
• Experience working safely with paints, solvents and chemicals in accordance with COSHH requirements.
• Ability to work effectively both independently and as part of a team.

About the role

This is a hands-on role suited to someone with strong attention to detail, a quality-focused mindset and a commitment to maintaining the highest aerospace inspection standards. You will be responsible for inspecting aerospace components using approved penetrant testing methods, identifying defects and ensuring products meet all customer, regulatory and company quality requirements.

Key responsibilities

• Perform Liquid Penetrant Inspection (LPI) / Penetrant Flaw Detection (PFD) on aluminium aerospace components in accordance with approved procedures and specifications.
• Apply penetrant, developer and inspection techniques to identify cracks, porosity, laps, seams and other surface-breaking defects.
• Conduct inspections under appropriate ultraviolet (UV) and white light conditions in accordance with approved inspection procedures.
• Interpret and evaluate inspection results against engineering drawings, specifications and acceptance criteria.
• Complete inspection records accurately and maintain full traceability of quality documentation.
• Identify, report and segregate non-conforming components in accordance with company quality procedures.
• Maintain inspection equipment and ensure all calibration and verification requirements are met.
• Follow all health and safety, environmental, COSHH and quality requirements at all times.
• Work closely with Quality, Manufacturing and Engineering departments to support product quality and resolve inspection-related issues.

Skills and experience

• Experience in Penetrant Flaw Detection (PFD), Liquid Penetrant Inspection (LPI) or Non-Destructive Testing (NDT). (Active Level 2 Qualification is preferred but not mandatory)
• Knowledge of liquid penetrant inspection methods, defect identification and interpretation.
• Ability to read and interpret engineering drawings, specifications and work instructions.
• Experience inspecting aluminium components, preferably within the aerospace industry.
• Strong attention to detail and commitment to maintaining high quality standards.
• Good record-keeping, reporting and documentation skills.
• Understanding of aerospace quality requirements and inspection procedures.
• Experience working within controlled manufacturing environments and following documented processes.
• Ability to work effectively both independently and as part of a team.

About the role

This is a hands-on role suited to someone with strong attention to detail, a quality-focused mindset and a commitment to maintaining the highest aerospace inspection standards. You will be responsible for inspecting aerospace components using a range of methods and tools such as vernier calipers, protractors, height gauges etc., identifying defects and ensuring products meet all drawings, customer, regulatory and company quality requirements.

Key responsibilities

• Manual inspection of sheet metal details and assemblies using hand measurement tools, such as vernier calipers protractors, height gauges etc.
• Follow Engineering Drawings and Customer Specifications.
• Visual inspection of surface finish and assemblies.
• Dimensional reporting to assist first article report generation.
• Provide Quality and Inspection support maintaining Right first time philosophy.
• Creation of Internal Non conformance reports.
• Ability to work effectively both independently and as part of a team

Skills and experience

• Previous Inspection experience.
• Ability to read and understand technical drawings.
• Previous experience of dimensional checking within a precision engineering, aerospace or Fabrication shop environment and be competent at checking using hand held measuring tools such as Verniers and Micrometers ideally within the Aerospace sector.
• Reliability & Punctuality.
• Good teamwork skills.
• Strong communication skills.

Key responsibilities

• Processing Customer Orders: Accurately process and enter customer purchase orders into our sales system, ensuring all necessary information is captured. This includes verifying product details, quantities, pricing, delivery schedules, and any special requirements.
• Sales Order Management: Maintain a comprehensive sales order database, ensuring that all orders are tracked through the full lifecycle—from initial order placement to delivery and invoicing. This includes managing order statuses, coordinating any changes or adjustments, and ensuring timely order fulfilment.
• Order Scheduling & Coordination: Work closely with the production and logistics teams to schedule and prioritize customer orders. Ensure that delivery timelines are met by aligning customer needs with production capacity.
• Customer Communication: Serve as the primary point of contact for customers throughout the order process. Regularly update customers on order status, delivery schedules, and any potential issues. Address and resolve any concerns or issues that may arise to ensure customer satisfaction.
• Order Documentation & Reporting: Maintain accurate and up-to-date order documentation, including delivery instructions, special requests, and customer correspondence. Generate and run reports in Redthorn and Excel to monitor order progress, track inventory, and identify potential bottlenecks in the sales order process.
• Liaising with Internal Teams: Collaborate with sales, production, and logistics teams to ensure that customer orders are processed and fulfilled in a timely and efficient manner. Communicate any changes or updates to all relevant stakeholders.
• Inventory Management Support: Assist with inventory management by updating stock levels, monitoring order requirements, and flagging any potential stock shortages or discrepancies.

Skills and experience

• Strong IT Skills: Proficiency in Microsoft Excel, Word, and other office software. Experience with order processing systems or ERP software (such as Redthorn) is an advantage.
• Attention to Detail: A meticulous approach to data entry, order processing, and documentation to avoid errors and ensure accurate order fulfilment.
• Time Management: Ability to prioritize and manage multiple tasks in a fast-paced environment while meeting deadlines and ensuring high levels of customer satisfaction.
• Communication Skills: Strong written and verbal communication skills to liaise effectively with customers and internal teams.
• Problem Solving: Proactive in identifying and resolving issues related to customer orders, delivery schedules, or internal coordination.
• Teamwork: Ability to work collaboratively within a team, contributing to team goals and supporting colleagues as needed.
• Reliability & Punctuality: A dependable and punctual individual who takes responsibility for their role and delivers high-quality results.
• Previous Administration Experience: Experience in a customer service role is advantageous, but not essential.
• Sales Order Experience: A background or understanding of sales order processing, inventory management, or customer service is preferred but not essential.

About the role

Although we are seeking an experienced candidate, it is not essential. For the right candidate that possesses the right capabilities, positive attitude, and willingness to learn, training shall be provided.

Key responsibilities

• Prepare and package aircraft parts for shipment in accordance with company procedures and international shipping regulations.
• Generate and verify shipping documentation including commercial invoices, packing lists, and export declarations.
• Conduct quality checks to ensure parts are correctly labelled, securely packed, and meet customer specifications.
• Ensure compliance with aerospace industry standards, export control regulations, and health & safety policies.
• Assist with inventory control, stock movements, and general warehouse duties as required.

Skills and experience

• A positive can-do attitude
• Hard working
• Takes pride in their work and their working environment
• Team player
• Reliable
• Flexible
• Punctual
• Adhere to Health and Safety standards in the workplace

What we offer

• Competitive hourly rate
• Flexible working arrangements
• Company pension scheme
• Ongoing training and development opportunities
• Supportive and experienced team environment
• Private health insurance (after 12 months of continuous employment)
• Holiday buy-back scheme (after 24 months of continuous employment)
• Up to 4 weeks full sick pay (after 24 months of continuous employment)

If you have the experience, attention to detail and quality-focused approach needed to succeed in this role, we would love to hear from you.

About the role

Although we are seeking an experienced candidate, it is not essential. For the right candidate that possesses the right capabilities, positive attitude, and willingness to learn, training shall be provided.

Key responsibilities

• Apply Identification Marks: Use ink or laser marking equipment to apply part numbers, serial numbers, batch codes, and other identifiers to components.
• Read and Interpret Drawings: Understand engineering drawings, specifications, and work instructions to determine correct marking requirements.
• Ensure Compliance: Follow industry standards and internal procedures to ensure markings are legible, durable, and correctly located.
• Quality Assurance: Inspect markings for accuracy, alignment, and clarity; rework or report any discrepancies.
• Tool Maintenance: Clean and maintain marking tools and equipment to ensure consistent performance.
• Collaboration: Work closely with quality control, production, and logistics teams to ensure timely and accurate part marking.

Skills and experience

• A positive can-do attitude
• Hard working
• Takes pride in their work and their working environment
• Team player
• Reliable
• Flexible
• Punctual
• Adhere to Health and Safety standards in the workplace

What we offer

• Competitive hourly rate
• Flexible working arrangements
• Company pension scheme
• Ongoing training and development opportunities
• Supportive and experienced team environment
• Private health insurance (after 12 months of continuous employment)
• Holiday buy-back scheme (after 24 months of continuous employment)
• Up to 4 weeks full sick pay (after 24 months of continuous employment)

If you have the experience, attention to detail and quality-focused approach needed to succeed in this role, we would love to hear from you.

About the role

Although we are seeking an experienced candidate, it is not essential. For the right candidate that possesses the right capabilities, positive attitude, and willingness to learn, training shall be provided.

Key responsibilities

• Accurately pick components and materials from stores based on production work orders and kitting lists.
• Maintain accurate inventory records using our MRP systems.
• Ensure traceability of all components in line with aerospace standards and company procedures.
• Perform regular stock checks and cycle counts to maintain inventory accuracy.
• Safely handle and store aerospace components.
• Liaise with production, quality, and procurement teams to resolve shortages or discrepancies.
• Maintain a clean, organized, and safe working environment in line with 5S and HSE standards.
• Strong attention to detail and accuracy in picking and kitting.
• Understanding of traceability and quality control requirements in aerospace.
• Ability to read and interpret part numbers, and technical documentation.

Skills and experience

• A positive can-do attitude
• Hard working
• Takes pride in their work and their working environment
• Team player
• Reliable
• Flexible
• Punctual
• Adhere to Health and Safety standards in the workplace

What we offer

• Competitive hourly rate
• Flexible working arrangements
• Company pension scheme
• Ongoing training and development opportunities
• Supportive and experienced team environment
• Private health insurance (after 12 months of continuous employment)
• Holiday buy-back scheme (after 24 months of continuous employment)
• Up to 4 weeks full sick pay (after 24 months of continuous employment)

If you have the experience, attention to detail and quality-focused approach needed to succeed in this role, we would love to hear from you.